Strap And Beamd With 72 [new] | Atir

Note: The keyword appears to contain a typo. Based on construction and engineering terminology, "atir" is likely (a brand or type of metal strap/connector), and "beamd" is likely Beamed . The number "72" likely refers to length in inches (6 feet) or a model number. This article addresses the use of 72-inch ATIR straps in beamed construction.

The ATIR Strap and Beam with 72 system boasts several key features that set it apart from traditional construction methods: atir strap and beamd with 72

Use a sharpie or scribe to mark the centers of all pre-punched holes. Offset pattern holes are common—avoid marking in a straight line along the grain to prevent wood splitting. Note: The keyword appears to contain a typo

Place the flat against the beam and the connecting member. For a beam-to-column connection, the strap should cover at least 24 inches of beam length and 48 inches of column length (or vice versa, depending on load direction). This article addresses the use of 72-inch ATIR