: Shows zone temperature (nearest 0.5°C or full degree Fahrenheit), occupancy status, and an alarm bell icon if active. Hydro-Temp! Installation and Technical Specifications Addressing : Unlike the RS Standard, the RS Pro does not require addressing
Includes "Warmer" and "Cooler" buttons for setpoint adjustments, a "Manual On" button for occupancy override, and an "Info" button to cycle through system data. automated logic rs pro thermostat manual
Indicates a system-level alarm that may require attention from building maintenance. : Shows zone temperature (nearest 0
increase the override time (e.g., each press adds 30 or 60 minutes, depending on the system configuration). Indicates a system-level alarm that may require attention
Improper installation is the number one cause of “thermostat not working” complaints. Follow this section exactly as you would the printed manual.
The RS Pro is a microprocessor-based controller designed to control fan coils, unit ventilators, and heat pumps. It communicates using the BACnet protocol, a standard language for building automation that allows devices from different manufacturers to talk to each other.
The Automated Logic RS Pro is an intelligent, Rnet-networked room sensor allowing users to manage temperature and occupancy within programmed limits. It features a digital display and local controls, with configuration for setpoints and overrides handled via WebCTRL software . For complete, detailed technical documentation, review the RS Technical Instructions . RS Standard and RS Pro Technical Instructions - Hydro-Temp!