Hyper Tough Jigsaw Manual -

Adds a circular "swinging" motion. Use higher settings for faster, rougher cuts in soft wood. Bevel Adjustment:

The cutting speed is usually controlled by the pressure you apply to the trigger. Orbital Action (if equipped): Setting 0: hyper tough jigsaw manual

| Problem | Likely cause | Solution | |---------|--------------|----------| | Won’t start | Battery dead / cord unplugged | Charge/reconnect | | Blade won’t lock | Debris in collet | Clean with compressed air | | Cuts curve | Blade bent or dull | Replace blade | | Excessive vibration | Wrong orbital setting | Reduce to 0 or 1 | | Shoe won’t tilt | Bevel screw still tight | Loosen further | Adds a circular "swinging" motion