Sp7731e 1h10 Native Firmware -

If you decide to root:

| Error Message | Likely Cause | Solution | |---------------|--------------|----------| | ERROR: S_FT_ENABLE_DRAM_FAIL | Wrong firmware (incorrect DRAM configuration for 1H10 board) | Find the exact 1H10 firmware; do not force-flash. | | BROM ERROR: S_BROM_CMD_STARTCMD_FAIL | Driver issue or wrong USB port | Uninstall drivers, reboot PC, use USB 2.0 port. | | Download Failed: Ack timeout | Device disconnected | Check cable; battery may be dead – charge for 2 hours. | | Checksum mismatch: vendor.img | Corrupted firmware file | Re-download the .pac from a different mirror. | | Status: Partition [prodnv] is protected | Native protection for radio calibration | Use a firmware that includes prodnv or flash without formatting that partition. | sp7731e 1h10 native firmware

Go to Settings > About Tablet and look for the build number (e.g., SP7731E_1H10_T702_20211208 ). The presence of "1H10" in the build string is a strong indicator. If you decide to root: | Error Message