Loosen the mitre table locks (2), rotate the table to the desired angle, and tighten the locks.
Dust extraction, laser guidance (model dependent), work clamp Safety Warnings
: If cuts are not accurate, check the 45-degree and 90-degree stops. You can calibrate these using a digital angle finder or a combination square against the blade.
Ensure the arrow on the new blade matches the rotation direction on the safety guard. 3. Making Cuts
Jig-zp8-210d Manual Page
Loosen the mitre table locks (2), rotate the table to the desired angle, and tighten the locks.
: If cuts are not accurate, check the 45-degree and 90-degree stops. You can calibrate these using a digital angle finder or a combination square against the blade. Loosen the mitre table locks (2), rotate the
Ensure the arrow on the new blade matches the rotation direction on the safety guard. 3. Making Cuts Loosen the mitre table locks (2)