How To Install Qnap Nas On Vmware — 'link'

Note: QNAP does not offer a free "QTS" virtual appliance for standard hypervisors. To run a QNAP OS in VMware, you either use QuTScloud (official, subscription-based) or a community-driven method using a modified bootloader (unsupported). This paper covers both, with a focus on the official method.

White Paper: Deployment of QNAP NAS Virtual Appliances on VMware vSphere 1. Introduction QNAP Systems provides two primary ways to virtualize their NAS operating system:

QuTScloud (c5.2.x) : The official, QEMU-based virtual appliance designed for AWS, Azure, and VMware vSphere . It offers QTS features (Qtier, snapshots, HybridMount) without dedicated hardware. Legacy/QEMU Bootloader Method : Running standard QTS firmware on VMware using an extracted boot image. This is unsupported by QNAP and violates EULA for commercial use.

Scope: This paper focuses on QuTScloud for production, with an appendix for lab-based alternative methods. 2. Prerequisites how to install qnap nas on vmware

VMware vSphere 6.7 or 7.0/8.0 (ESXi) vCenter Server (recommended for OVF deployment) Minimum 4 vCPUs, 8 GB RAM, 64 GB thin-provisioned disk for QuTScloud Valid QuTScloud license (trial or purchased from QNAP Store) Access to QNAP Download Center: https://www.qnap.com/download → QuTScloud

3. Step-by-Step Installation: QuTScloud on VMware 3.1 Download the OVF/OVA Package

Navigate to QNAP Download Center → QuTScloud → Virtualization . Select VMware vSphere (OVF format). Download the .ova file (e.g., qu Tscloud _c5.2.x_vmware.ova ). Note: QNAP does not offer a free "QTS"

3.2 Deploy OVF Template in vSphere

Login to vCenter → Right-click a cluster/host → Deploy OVF Template . Select Local file → Upload the .ova . Name & Location : e.g., QNAP-QuTScloud-01 . Resource : Select a compatible ESXi host. Storage : Choose datastore (SSD recommended for metadata). Deployment configuration : Choose thin provision for disk format. Network mapping : Map to a VLAN that can reach your management network (DHCP required initially). Power on after deployment → Click Finish .

3.3 Initial Configuration

Console access : Open VM console → QuTScloud will boot and display a DHCP-acquired IP.

If no DHCP : Login as admin / admin (default) and run ifconfig eth0 192.168.1.100 netmask 255.255.255.0 (temporary).