T-verter Sv3-405-h3 Manual | EXCLUSIVE |

Maintain a steady ambient temperature and avoid high-humidity areas.

These include digital inputs (for Start/Stop/Reverse), analog inputs (0-10V or 4-20mA for speed control), and relay outputs for fault signaling. Key Programming Parameters t-verter sv3-405-h3 manual

| Terminal | Signal Type | Default Function (Pn setting dependent) | | --- | --- | --- | | | Analog Reference | 10V DC output for external potentiometer | | AI1 | Analog Input 1 | Speed reference (0-10V or 4-20mA) | | AI2 | Analog Input 2 | Optional secondary feedback | | GND | Common | Ground for analog signals | | DCM | Digital Common | Ground for digital inputs (0V) | | DI1 | Digital Input 1 | Run Forward (FWD) | | DI2 | Digital Input 2 | Run Reverse (REV) | | DI3 | Digital Input 3 | Fault Reset | | DI4 | Digital Input 4 | Multi-speed preset 1 | | DO1 (TA/TB) | Relay Output | Fault indicator (Normally Open/Closed) | | +24V | Auxiliary Supply | 24V DC output for sensors (max 100mA) | Below are the most common parameters adjusted during

To configure the SV3-405-H3, you must access the digital keypad. Below are the most common parameters adjusted during initial setup: Selects between Vector and V/F. you must access the digital keypad.