Adding the line [CONST_PARAM] rtsp=1 (or rtsp_enable=1 for newer variants).
Once in the U-Boot prompt, you will use commands like tftp or write directly to NAND flash. v380 custom firmware
Example command sequence (simplified):
Once custom firmware runs, enable:
| Feature | Stock V380 Firmware | V380 Custom Firmware (OpenIPC) | | :--- | :--- | :--- | | | P2P only (via Chinese servers) | RTSP, RTMP, HTTP-FLV, HLS | | NVR Support | Limited / Broken ONVIF | Full ONVIF Profile S & T | | Home Assistant | No native integration | Native MQTT auto-discovery | | Audio Codecs | Locked G.711 | AAC, PCM, G.726 selectable | | Motion Detection | Cloud-based or laggy | Local ffmpeg or motion | | Night Mode | Fixed schedule | Manual GPIO control | | Privacy | Unknown telemetry | No internet access required | | SSH Access | No | Yes (Root shell) | Adding the line [CONST_PARAM] rtsp=1 (or rtsp_enable=1 for