Ms-7829 Motherboard Manual -

The MS-7829 is a Micro-ATX motherboard manufactured by MSI primarily for Acer desktop systems, such as the Acer Aspire TC-603 and Predator G3-605 . Built on the Intel B85 chipset and featuring an LGA 1150 socket, it supports 4th generation Intel Core (Haswell) processors. Because this is an OEM (Original Equipment Manufacturer) board, a traditional retail manual is rarely available. Instead, technical documentation is often spread across Acer support pages and community forums. This article compiles the essential technical specifications, pinouts, and installation guides you would find in an official manual. Core Hardware Specifications The MS-7829 is designed for stability and standard desktop use with the following key components: Socket Type: LGA 1150 / Socket H3 . Chipset: Intel B85 (Lynx Point) . Memory: 4 x DDR3 DIMM slots. Max Capacity: 32GB. Speed: Supports DDR3-1600/1333 MHz. Storage: SATA III (6Gb/s) ports. 1 x mSATA slot for small SSDs. Expansion Slots: 1 x PCI Express x16 (for discrete graphics). 1 x PCI Express x1. 1 x Mini PCI-E slot. Audio: Integrated Realtek ALC662 or ALC892 high-definition audio. Rear I/O and Connectivity The board features a standard array of ports for typical desktop configurations: Video Out: HDMI, DisplayPort, and VGA (Integrated graphics require a CPU with onboard video). USB: Multiple USB 3.0 and USB 2.0 ports. Networking: Gigabit Ethernet (RJ-45). Front Panel Header Pinout

The Ultimate Guide to the MS-7829 Motherboard Manual: Specifications, Setup, and Troubleshooting If you are holding a motherboard labeled MS-7829 , you are likely in the middle of a PC build, a repair project, or simply trying to upgrade an older system. However, finding the correct documentation for this specific board can be slightly confusing due to manufacturer naming conventions. The MS-7829 is, in fact, an MSI (Micro-Star International) motherboard, most commonly found in pre-built systems like the MSI Aegis or specific OEM desktop builds utilizing the H110 chipset. Because it is often an OEM (Original Equipment Manufacturer) product, the manual isn't always as readily available on retail shelves as it is for consumer boards like the MSI Gaming Pro series. This comprehensive article serves as your complete MS-7829 motherboard manual . We will cover identification, specifications, the pinout layout, BIOS updates, and common troubleshooting steps to ensure you get your system up and running.

1. Identifying the MS-7829 Before attempting to install any components, it is crucial to verify the revision and model of your board. While the model number "MS-7829" is printed on the PCB (Printed Circuit Board), this board is typically the MSI H110M PRO-VD (or a variant thereof). Key Identifiers:

Model Name: MS-7829 (H110 chipset) Form Factor: Micro-ATX (240mm x 240mm typically, though OEM versions may vary slightly). Socket: LGA 1151 (Supports Intel 6th and 7th Generation processors). ms-7829 motherboard manual

If you are looking for the official PDF, searching for "MSI H110M PRO-VD manual" will often yield the closest matching documentation, as the layout is nearly identical to the MS-7829 OEM variant.

2. Technical Specifications Understanding the limitations of your hardware is the first step in a successful build. The MS-7829 is an entry-level board designed for Skylake and Kaby Lake processors. CPU Support

Socket: LGA 1151. Compatible CPUs: Intel Core i7, i5, i3, Pentium, and Celeron of the 6th (Skylake) and 7th (Kaby Lake) Generations. The MS-7829 is a Micro-ATX motherboard manufactured by

Note: Using 7th Gen processors usually requires a BIOS update if the board was manufactured earlier.

TDP Support: Generally supports CPUs up to 65W-80W. High-wattage i7 Extreme editions may not be suitable.

Memory (RAM)

Slots: 2 x DDR4 DIMM slots. Capacity: Supports up to 32GB total (16GB per slot). Speed:

2133 MHz (Native for 6th Gen CPUs). 2400 MHz (Native for 7th Gen CPUs).