: Twist the threaded bottom collar of the holder until the exposed tip extends roughly 0.5 mm . This represents half the thickness of a standard credit card.
For long production runs (e.g., 50 decals), the PCUT CT630 supports a system. pcut ct630 setup
: Slide the vinyl forward from the back of the machine, feeding it under the pinch rollers and over the grit micro-groove drive shaft. : Twist the threaded bottom collar of the
Remove the blade holder from the machine. Adjust the blade tip so it protrudes roughly half the width of a credit card pcut ct630 setup
: Place the Creation PCut CT630 onto the stand bracket. Lock it firmly into position using the mounting screws located underneath the base.