Mitsubishi Meldas 64 Parameter Manual Jun 2026

A common misconception is that all Meldas 64 controls are the same. Mitsubishi provided the control system, but companies like Mazak, Mori Seiki, Okuma, and Kitamura built the machines.

This is a comprehensive guide to the Parameters. Since Mitsubishi no longer publishes a single "Parameter Manual" as a standalone consumer document (the full technical documentation is split into the Hardware Manual , Connection Manual , and PLC Programming Manual ), this guide consolidates the most critical parameter categories, ranges, and functions based on the official Meldas 60/60S/64/64S series documentation. Mitsubishi Meldas 64 Parameter Manual

| Format | Description | Example in Manual | Usage | | :--- | :--- | :--- | :--- | | | An 8-bit (0-7) or 16-bit field. Each bit controls a single toggle. | #1150 bit 2 = 1 | Turning functions ON/OFF. | | Byte | A small integer (0 to 255). | #8001 = 50 | Timer delays (milliseconds). | | Word | A larger integer (-32768 to 32767). | #2001 = 12000 | Maximum feedrate (mm/min). | | 2-Word (Long) | Very large integers or positions in microns. | #1001 = -5000000 | Software stroke limit. | A common misconception is that all Meldas 64

Critical for fine-tuning motor performance, gain adjustments, and high-speed machining accuracy. Since Mitsubishi no longer publishes a single "Parameter