Steer angle error. Often caused by a dead proximity sensor or issues with the steering controller. 40062: Lift motor thermal sensor issue. System & Power Supply
Dead display, or display lights up but throttle does nothing. The truck will not move. jungheinrich etv 216 error codes
The battery gauge shows empty flashes, or the truck shuts down even on a fully charged battery. Steer angle error
Leave a comment below with your exact ETV 216 error code and truck serial number prefix (e.g., 510xxxx). For urgent support, contact your local Jungheinrich service partner. System & Power Supply Dead display, or display
Many codes indicate that the truck is functioning correctly but is being prevented from moving due to safety interlocks or operator status. Action Required Battery door open Ensure the battery compartment is fully closed. 0938.1 Battery discharged (0%) Recharge the battery immediately to prevent damage. 1901.1 Drive pedal active at startup Release the drive pedal and restart the truck. 1908.1 Seat belt not closed Fasten the seat belt/harness to enable travel. 1909.1 Parking brake not released Manually release the parking brake before driving. 1917.1 Simultaneous pedal activation Do not press the drive and brake pedals at the same time. 2951.1 Hydraulics active at startup Ensure all hydraulic levers are in neutral during startup. ⚡ Technical & Hardware Faults