Please submit transfers happening in the summer as future transfers. On the 20th of May and afterwards, we will start adding transfers as immediate. Until then, ALL player transfers should be submitted as FUTURE.
Thanks
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | Device not listed in Zadig | Cable failure or power issue | Replace USB cable. Connect to a powered USB hub (the DSO-2090 can draw up to 300mA). | | Installation fails with “Driver installation error” | Windows Defender / Antivirus blocking | Temporarily disable Real-time Protection. Re-run Zadig as Administrator. | | Zadig sees the device, but software says “No Device” | The software is 32-bit and looking for a different driver name | Use the software instead. It is more robust with WinUSB. | | BSOD (Blue Screen) after connecting | Old libusb0.sys driver conflict | Run Zadig → Replace driver with WinUSB (not libusb). Boot into Safe Mode and delete any older libusb0.sys from C:\Windows\System32\drivers . | | Waveform is noisy or frozen | USB 3.0 port interference | Use a USB 2.0 port. Add a ferrite choke to the USB cable. | | Driver installs, but device disappears after sleep | Windows 10 USB selective suspend | Go to Power Options → Change plan settings → Change advanced power settings → USB settings → USB selective suspend → Disable. |
To generate a proper feature set for a on Windows 10 , we need to first understand the device. dso-2090 usb driver windows 10