Hp Color Laserjet Pro Mfp M177fw Document Feeder Jam Updated Jun 2026

Sometimes, a bug in the firmware causes false jam errors.

clear the physical path, clean the rollers, and then perform a power reset 1. Clear the Jammed Paper Exterior Path hp color laserjet pro mfp m177fw document feeder jam

The ADF uses small rubber rollers to grip the paper and pull it into the scanner. Over time, these rollers accumulate paper dust and toner residue, making them slick. Instead of gripping the paper, they slip, causing the printer to "think" a jam has occurred because the paper didn't reach the next sensor on time. Sometimes, a bug in the firmware causes false jam errors

Clearing a single jam is a short-term fix. If your M177fw document feeder jams frequently, there is an underlying mechanical or environmental cause. Here are the most common culprits. Over time, these rollers accumulate paper dust and

Once the paper is removed, close the ADF cover firmly until it clicks into place. Plug the printer back in and turn it on. The printer should perform a startup cycle. If the error message persists, open the cover again and check for torn scraps you may have missed.