Vcd 2000 Manual !!link!!

Page 47 states: "Only adapters with the FTDI chipset (Rev B or later) are supported. Prolific chipsets cause Error 22." If you have Rev A, you must use a native RS-232 port.

The VCD 2000 is a Video CD player that plays: Vcd 2000 Manual

: Users must never connect AC power to the output terminals (U, V, W) as this can cause an explosion. Common Fault Codes : Page 47 states: "Only adapters with the FTDI

| Button | Short Press (0.5s) | Long Press (3s) | | :--- | :--- | :--- | | | Wake from sleep | Hard shutdown (bypasses RAM save) | | Mode | Cycle display: Voltage > Current > Frequency > Temperature | Enter Configuration Menu (requires passcode) | | Zero/Cal | Relative zero offset | Start guided calibration wizard (password protected) | | Store | Save current reading to internal memory (max 200 logs) | Print current reading via serial port | | Up/Down | Adjust contrast / scroll menus | Fast-scroll (10x speed) | Common Fault Codes : | Button | Short Press (0

It outputs to standard RCA (composite video + stereo audio) or RF (older TVs). Many units have (playback control, menus).

– Use only the supplied AC adapter (often 12V DC, center positive). Using the wrong adapter can damage the unit.