However, like any sophisticated piece of equipment, its functionality relies on correct setup. Whether you are a facility manager, a door technician, or a DIY installer, the is your blueprint for success. Without it, you risk false triggers, non-activation, or even safety hazards.
: Check power supply and relay cabling.
The manual warns that if one sensor fails shorted, all sensors may appear triggered. To avoid this, install a current-sensing relay or use each sensor on a separate input if the controller allows. bea eyetech mr manual
| Parameter | Value | |-----------|-------| | Supply voltage | 12 – 24 V AC/DC (±10%) | | Current consumption | < 50 mA | | Relay output | Dry contact, max 42 V AC/DC, 1 A | | Output hold time | 0.5 s – 60 s (adjustable) | | Detection frequency | 24.125 GHz (ISM band) | | Mounting height | 2.0 – 3.0 m (6.5 – 9.8 ft) | | Protection class | IP54 | | Operating temp | -20 °C to +55 °C (-4 °F to 131 °F) | | Dimensions | Ø110 × 32 mm | | Material | ABS + UV protective coating | However, like any sophisticated piece of equipment, its
The Eyetech MR requires minimal maintenance, but the manual specifies the following quarterly checks: : Check power supply and relay cabling
: Use the potentiometer to set how long the door stays open after detection (factory recommended: 2 seconds). Jumper Settings :